工具金相 X3020-广东谨诺科技有限公司

产品中心

光学检测设备: 显微镜光谱仪器激光测试设备 X-RAY工业CT 红外光仪器可见光分析仪器超声波显微镜
力学实验设备: 插拔力试验机抗压试验机拉力试验机跌落试验机耐磨试验机扭力试验机弯折试验机振动试验台按键寿命试验机铅笔硬度计剥离力试验机冲击试验机电池试验机扭转试验机疲劳试验机万能试验机电子天平张力计应力测试仪硬度计
化学实验设备: CVS PH计气相质谱仪糖度计锡膏粘度测试仪
电学测试设备: IV曲线分析仪 LCR数值电表 SEM扫描电镜电导率仪静电测试仪静电发生器
环境试验设备: 恒温恒湿箱高低温试验箱冷热冲击箱盐雾试验箱老化实验箱快速温变箱高空低压温度试验箱恒温水箱
尺寸测量设备: 高度计影像测量仪一键式测量投影仪关节臂三坐标轮廓度扫描仪
外观检测设备
定制与在线自动化
检测周边配套: 智能探针台百格刀标准量块尘埃粒子计数仪砝码风速测试仪机械手切片抛光机锡膏粘度计锡炉校准证书真空等离子

联系我们

地　址：广东省东莞市东城区东科路广汇工业区28栋

电　话：0769-22820867

传　真：0769-22820867

联系人：13352610558　徐先生

邮　箱：sales1@jinuosh.com

产品详情

1.设备概述

1.1光學部份 Optical Part:

采用专业微分干涉光学头；Professional differential interference optical head is used.

多层镀膜技术保证清晰度；Multilayer coating technology ensures clarity.

明光路及高倍率物镜观察；Light path and high power objective lens observation;

配有LED表面光及底部光；It is equipped with LED surface light and bottom light.

1.2主機部份Host part:

由花岗岩制成的测量平台和大理石龙门式结构，大理石与底座之间有四个防震垫，达到防震效果。高精度手工打磨导轨，最大承载工件重量：50 Kg. The measuring platform made of granite and the marble gantry structure have four cushions between the marble and the base to achieve the anti-seismic effect. High precision manual grinding guide rail, maximum load-bearing workpiece weight: 50 Kg.t

Measuring Range/测量范围:

X-axis: 300 mm

Y-axis: 200 mm

Z-axis: 200 mm

Z轴最小移动精度为0.1μm。

整机运行无需水、气，要求220V电压。

2.硬件描述

Instrument Main Body仪器机身

Marble base, column, work table 大理石底座\立柱\工作台面（平整度≤10μm）

Transmisson System传动系统

无牙螺母+光杆传动

Sport Guide运动导轨

精密级V型导轨

Optical calibrator光学校正片（用来校正精度）

Special custom 专用定制

Monitor显示器

21.5 " liquid crystal display 21.5〞液晶显示器

Keyboard / mouse键盘/鼠标

Optoelectronic package 光电套装

Instrument table仪器工作台

Customized 定制

Dust cover防尘罩

Customized 定制

User 's Manual用户手册

Sharpscope 3D special Sharpscope 3D专用

3.设备配置清单：

具体配置如下
1	X3020 Coarse and Precise Focus Unit X3020基座和调焦系统	1	套
2	300x200mm Precise Stsge 精密载物台	1	个
3	U-Bracket Mount LV U 型支架	1	个
4	LV-TI 3 Trinocular Eyepiece Tube 三目防静电目镜筒	1	套
5	Quadruple Nosepiece,For 5 sets of Objectives五孔鼻轮转换器	1	套
6	Eyepiece CFI 10x10倍高清目镜	1	对
7	5W LED Point Ligte built-inTransformer for piscopic Illumination 5W LED上下光源	2	个
8	F-P Simple Polarizign Unit (For Episcopic Illumination) 偏光系统	1	套
9	DIC Prism DIC微分干涉	1	套
10	Power Supply (220V) 上下光源控制器	1	个
11	.Photo Adapter 物镜影象接口转接环	1	个
12	Axle counter 两轴计数器	1	个
13	DS-Vil Color Camera Head 200万像素高清CCD	1	个
14	SOFTWARE 测量软件测量精度0.1um	1	套
15	M Plan Apo HL 5X 5倍高分辨率物镜	1	个
16	M Plan Apo HL 10X 10倍高分辨率物镜	1	个
17	M Plan Apo HL 20X 20倍高分辨率物镜	1	个
18	M Plan Apo HL 50X 50倍高分辨率物镜	1	个
19	Computer monitor 19寸联想显示器	1	台
20	DS Camera I/F Cable 20-26 摄像头控制器连接线。	1	跟
21	USB A TO B CABLE USB数据线	1	跟
22	POWER CORD 电源线	3	跟

三．其他零配件Other spare parts

1.防尘罩1件 Dust-proof cover 1 piece

2.软件使用说明书1本Software Instructions 1

3.用户手册1本User Manual 1

4. 环境要求Environmental requirements

（1）仪器放置的工作桌面需牢固、可靠、不得摇晃（由供应商提供）；The working table for the instrument should be firm, reliable and not shake (provided by the supplier);

（2）放置地点需远离各种震源（放置地点不会有影响，机器本身有防震垫，只要不是在震感十分明显的震源附近，就没有问题）；The location should be far away from all kinds of seismic sources (the location will not affect, the machine itself has shock pads, as long as it is not near the source with obvious earthquake

（3）环境温度保持在20℃~25℃，相对湿度≤75%；The ambient temperature is maintained at 20 ~25 C, and the relative humidity is less than 75%.

（4）放置环境应该优于国际8级无尘室标准Placement environment should be superior to the International Class 8 Dustproof Room Standard.；

（5）供电电源必须有电阻≤4Ω的接地保护The power supply must have grounding protection with resistance less than 4；

（6）设备需接220V±10%（AC） 50Hz 设备对水、气没有要求The equipment needs to be connected to 220V+10%(AC) 50Hz equipment, which has no requirement for water and gas.。

5.搬运、安装措施Handling and Installation Measures

（1）我方负责将设备运送至客户指定地方，并进行安装调试。客户需负责提供必要的安装及搬运所需。例如：地板叉、电动叉车、协助人员等We are responsible for transporting the equipment to the designated place of the customer and carrying out installation and debugging. Customers are responsible for providing necessary installation and handling requirements. For example: floor fork, electric forklift, assistant, etc.；

（2）须严格按照我方技术人员要求进行操作，如有违规操作并因此产生的设备损坏（需更换配件的不包含在内）本公司负责维修，但不承担任何责任Operations shall be carried out in strict accordance with the requirements of our technicians. In case of equipment damage caused by irregular operations (not included in the replacement parts), the company shall be responsible for maintenance, but shall not bear any responsibility；

（3）我方技术人员会在安装过程中进行仪器水平调节、软件安装调试、各类视讯卡安装、加密狗安装等操作Our technicians will adjust the level of instruments, install and debug software, install various video cards and install encrypted dogs during the installation process；

（4）我方技术人员会在装机结束后进行X轴、Y轴、Z轴校正，随即结束安装Our technicians will correct X-axis, Y-axis and Z-axis after installation, and then finish installation；

（5）设备安装完成后，不可在未通知我方的情况下随意搬动机台After the installation of the equipment is completed, the platform shall not be moved at will without notice to us.。

6. 培训计划及服务保证Training Program and Service Guarantee

（1）培训内容Training content

了解设备各硬件名称及功能Understand the hardware names and functions of the equipment；

常规使用注意事项Notes for routine use；

软件功能及操作Software function and operation；

常见问题解决办法Solutions to common problems.

（2）售后服务After-sales service

① 同版本软件三年内免费升级Free upgrade of the same version software within three years；

② 设备整机12个月超长保修，超出12个月的无需更换配件维修均为免费The equipment is guaranteed for 12 months, and the maintenance of spare parts without replacement is free for 12 months；

③ 关于本设备的任何问题，会在接到客户来电的2小时内给予回应并在无法电话解决的情况下24小时内到达现场Any questions about the equipment will be answered within 2 hours after receiving calls from customers and will arrive at the scene within 24 hours when the calls cannot be solved。

④ 若贵司使用人员发生更换，我们免费进行新的操作培训If there is a change in your company's users, we will conduct new operation training free of charge。

7.售、购双方责任Duties of both Sellers and Buyers

（1）我方负责设备的运送及安装调试；购方负责设备搬入时必须的叉车等装置We are responsible for the transportation, installation and commissioning of the equipment; the buyer is responsible for forklift trucks and other devices necessary for the equipment to be moved in；

（2）我方负责设备的使用及常见问题解决培训；购方负责安排及约束使用人员进行认真听讲We are responsible for the use of equipment and training of common problem solving; the buyer is responsible for arranging and restraining the use of personnel to listen carefully；

（3）我方负责进行售后服务及疑问解答；购方负责约束使用人员不可进行违规操作We are responsible for after-sales service and question answering, and the buyer is responsible for restraining users from illegal operations；

（4）我方负责在三年内进行软件免费升级（在有版本更新的情况下）We are responsible for free software upgrade within three years (with version updates).

8.专利权限确认

If patent infringement occurs, Maker accepts full liability for any direct and indirect loss of customer. Additionally, in case of patent dispute, Maker guarantees continuous use (operation) of the system equipment provided by Maker.

如果发生专利侵权情况，供应商承担全部责任，并且客户由此产生的直接和间接的损失也由供应商承担。此外，再专利纠纷的情况下，供应商保证客户可以继续正常使用设备（系统）。

分享到：

点击次数：更新时间：2019-12-30 20:39:50 【打印此页】【关闭】

上一条：金相显微镜G-D60 下一条：工具金相MU300

跟此产品相关的产品